SQJA90EP www.vishay.com vishay siliconix s16-2224-rev. a, 31-oct-16 1 document number: 67439 for technical questions, contact: automostechsuppo rt@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 automotive n-channel 80 v (d-s) 175 c mosfet features ? trenchfet ? power mosfet ? aec-q101 qualified ? 100 % r g and uis tested ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 notes a. pulse test; pulse width ? 300 s, duty cycle ? 2 %. b. when mounted on 1" square pcb (fr4 material). c. see solder profile ( www.vishay.com/doc?73257 ). the powerpak so-8l is a leadless package. the end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. a solder fillet at the exposed copper tip cannot b e guaranteed and is not required to ensure adequa te bottom side sold er interconnection. d. rework conditions: manual soldering with a solderin g iron is not recommended for leadless components. product summary v ds (v) 80 r ds(on) ( ? ) at v gs = 10 v 0.0076 i d (a) 60 configuration single package powerpak so-8l powerpak ? s o-8l s ingle 2 s 3 s 4 g 1 s d bottom view 1 6.15 mm 5.13 mm top view d g s n-channel mosfet absolute maximum ratings (t c = 25 c, unless otherwise noted) parameter symbol limit unit drain-source voltage v ds 80 v gate-source voltage v gs 20 continuous drain current t c = 25 c i d 60 a t c = 125 c 37 continuous source curren t (diode conduction) i s 60 pulsed drain current a i dm 160 single pulse avalanche current l = 0.1 mh i as 34 single pulse avalanche energy e as 57 mj maximum power dissipation a t c = 25 c p d 68 w t c = 125 c 22 operating junction and storage temperature range t j , t stg -55 to +175 c soldering recommendations (peak temperature) c, d 260 thermal resistance ratings parameter symbol limit unit junction-to-ambient pcb mount b r thja 68 c/w junction-to-case (drain) r thjc 2.2
SQJA90EP www.vishay.com vishay siliconix s16-2224-rev. a, 31-oct-16 2 document number: 67439 for technical questions, contact: automostechsuppo rt@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes a. pulse test; pulse width ? 300 s, duty cycle ? 2 %. b. guaranteed by design, not subj ect to production testing. c. independent of operating temperature. stresses beyond those listed under absolute maximum ratings ma y cause permanent damage to th e device. these are stress rating s only, and functional operation of the device at these or any other conditions beyond those in dicated in the operational sectio ns of the specifications is not implied. exposure to absolute maximum rating conditions for extended pe riods may affect device reliability. specifications (t c = 25 c, unless otherwise noted) parameter symbol test conditions min. typ. max. unit static drain-source breakdown voltage v ds v gs = 0, i d = 250 a 80 - - v gate-source threshold voltage v gs(th) v ds = v gs , i d = 250 a 2.5 3.0 3.5 gate-source leakage i gss v ds = 0 v, v gs = 20 v - - 100 na zero gate voltage drain current i dss v gs = 0 v v ds = 80 v - - 1 a v gs = 0 v v ds = 80 v, t j = 125 c - - 50 v gs = 0 v v ds = 80 v, t j = 175 c - - 150 on-state drain current a i d(on) v gs = 10 v v ds ? 5 v 30 - - a drain-source on-state resistance a r ds(on) v gs = 10 v i d = 10 a - 0.0063 0.0076 ? v gs = 10 v i d = 10 a, t j = 125 c - - 0.0121 v gs = 10 v i d = 10 a, t j = 175 c - - 0.0148 forward transconductance b g fs v ds = 15 v, i d = 10 a - 45 - s dynamic b input capacitance c iss v gs = 0 v v ds = 25 v, f = 1 mhz - 2629 3500 pf output capacitance c oss - 1487 2000 reverse transfer capacitance c rss -5070 total gate charge c q g v gs = 10 v v ds = 40 v, i d = 5 a -3655 nc gate-source charge c q gs -10- gate-drain charge c q gd -6- gate resistance r g f = 1 mhz 0.18 0.39 0.62 ? turn-on delay time c t d(on) v dd = 40 v, r l = 8 ? i d ? 5 a, v gen = 10 v, r g = 1 ? -1625 ns rise time c t r -510 turn-off delay time c t d(off) -2640 fall time c t f -1930 source-drain diode ratin g s and characteristics b pulsed current a i sm --160a forward voltage v sd i f = 10 a, v gs = 0 - 0.8 1.5 v body diode reverse recovery time t rr i f = 10 a, di/dt = 100 a/s - 64 130 ns body diode reverse recovery charge q rr - 108 220 nc reverse recovery fall time t a -31- ns reverse recovery rise time t b -34- body diode peak reverse recovery current i rm(rec) --3.1-6a
SQJA90EP www.vishay.com vishay siliconix s16-2224-rev. a, 31-oct-16 3 document number: 67439 for technical questions, contact: automostechsuppo rt@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t a = 25 c, unless otherwise noted) output characteristics on-resistance vs. drain current gate char g e transfer characteristics capacitance on-resistance vs. junction temperature 10 100 1000 10000 0 20 40 60 80 100 120 0246810 axis title 1st line 2nd line 2nd line i d - drain current (a) v ds - drain-to-source voltage (v) 2nd line v gs = 10 v thru 6 v v gs = 5 v v gs = 4 v 10 100 1000 10000 0.000 0.003 0.006 0.009 0.012 0.015 0 1632486480 axis title 1st line 2nd line 2nd line r ds(on) - on-resistance ( ) i d - drain current (a) 2nd line v gs = 10 v 10 100 1000 10000 0 2 4 6 8 10 0 1020304050 axis title 1st line 2nd line 2nd line v gs - gate-to-source voltage (v) q g - total gate charge (nc) 2nd line i d = 5 a v ds = 40 v 10 100 1000 10000 0 16 32 48 64 80 0246810 axis title 1st line 2nd line 2nd line i d - drain current (a) v gs - gate-to-source voltage (v) 2nd line t c = 25 c t c = -55 c t c = 125 c 10 100 1000 10000 0 800 1600 2400 3200 4000 0 20406080 axis title 1st line 2nd line 2nd line c - capacitance (pf) v ds - drain-to-source voltage (v) 2nd line c rss c oss c iss 10 100 1000 10000 0.5 0.8 1.1 1.4 1.7 2.0 -50-25 0 255075100125150175 axis title 1st line 2nd line 2nd line r ds(on) - on-resistance (normalized) t j - junction temperature (c) 2nd line i d = 10 a v gs = 10 v
SQJA90EP www.vishay.com vishay siliconix s16-2224-rev. a, 31-oct-16 4 document number: 67439 for technical questions, contact: automostechsuppo rt@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t a = 25 c, unless otherwise noted) source drain diode forward volta g e threshold volta g e on-resistance vs. gate-to source volta g e transconductance drain source breakdown vs . junction temperature 10 100 1000 10000 0.001 0.01 0.1 1 10 100 0 0.2 0.4 0.6 0.8 1.0 1.2 axis title 1st line 2nd line 2nd line i s - source current (a) v sd - source-to-drain voltage (v) 2nd line t j = 150 c t j = 25 c 10 100 1000 10000 -1.5 -1.1 -0.7 -0.3 0.1 0.5 -50 -25 0 25 50 75 100 125 150 175 axis title 1st line 2nd line 2nd line v gs(th) variance (v) t j - temperature (c) 2nd line i d = 5 ma i d = 250 a 10 100 1000 10000 0.00 0.01 0.02 0.03 0.04 0.05 0246810 axis title 1st line 2nd line 2nd line r ds(on) - on-resistance ( ) v gs - gate-to-source voltage (v) 2nd line t j = 25 c t j = 150 c 10 100 1000 10000 0 20 40 60 80 100 0 5 10 15 20 25 axis title 1st line 2nd line 2nd line g fs - transconductance (s) i d - drain current (a) 2nd line t c = 25 c t c = -55 c t c = 125 c 10 100 1000 10000 85 89 93 97 101 105 -50-25 0 255075100125150175 axis title 1st line 2nd line 2nd line v ds - drain-to-source voltage (v) t j - junction temperature (c) 2nd line i d = 1 ma
SQJA90EP www.vishay.com vishay siliconix s16-2224-rev. a, 31-oct-16 5 document number: 67439 for technical questions, contact: automostechsuppo rt@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t a = 25 c, unless otherwise noted) safe operatin g area normalized thermal transient impedance, junction-to-ambient 10 100 1000 10000 0.01 0.1 1 10 100 1000 0.01 0.1 1 10 100 1000 axis title 1st line 2nd line 2nd line i d - drain current (a) v ds - drain-to-source voltage (v) (1) v gs > minimum v gs at which r ds(on) is specified i dm limited limited by r ds(on) (1) t c = 25 c single pulse bvdss limited 100 ms, 1 s, 10 s, dc 10 ms 1 ms 100 s 10 -3 10 -2 1 10 600 10 -1 10 -4 100 2 1 0.1 0.01 0.2 0.1 0.05 0.02 single pulse duty cycle = 0.5 square wave pulse duration (s) normalized effective transient thermal impedance 1. duty cycle, d = 2. per unit base = r thja = 68 c/w 3. t jm - t a = p dm z thja (t) t 1 t 2 t 1 t 2 notes: 4. surface mounted p dm
SQJA90EP www.vishay.com vishay siliconix s16-2224-rev. a, 31-oct-16 6 document number: 67439 for technical questions, contact: automostechsuppo rt@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t a = 25 c, unless otherwise noted) normalized thermal transient impedance, junction-to-case note ? the characteristics shown in the two graphs - normalized transient thermal impedance junction-to-ambient (25 c) - normalized transient thermal impedance junction-to-case (25 c) are given for general guidelines only to enable the user to ge t a ball park indication of part capabilities. the data are ext racted from single pulse transient thermal impedance characteristics which are developed from empirical measurements. the latter is valid for the part mounted on printed circuit board - fr4, size 1" x 1" x 0.062" , double sided with 2 oz. copper, 100 % on both sides. the part ca pabilities can widely vary depending on actual application parameters and operating conditions. vishay siliconix maintains worldw ide manufacturing ca pability. products may be manufactured at one of several qualified locatio ns. reliability da ta for silicon technology and package reliability represent a composite of all qu alified locations. for related documents such as package/tape drawings, part marking, and reliability data, see w ww.vishay.com/ppg?67439 . 10 -3 10 -2 110 10 -1 10 -4 2 1 0.1 0.01 0.2 0.1 0.05 0.02 single pulse duty cycle = 0.5 square wave pulse duration (s) normalized effective transient thermal impedance
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
